| Changing Pistons |
| 05-23-2021, (Subject: Changing Pistons ) Post: #4 | |||
| |||
RE: Changing Pistons (05-23-2021 )RocketScott Wrote: A Cummins CPL 1280 is a 444xt. The ESN is 11535281 Mr. Hag used to rebuild those old engines.. he was quite good at it... Maybe he, or perhaps someone else experienced will chime in with some advice. Realistically, the higher compession ratio is the way to go if you can. Just remember that higher compression ratio requires a bit less boost to get the right fuel-air-mix on it back into spec. Here are the part#s that it calls for...  User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Changing Pistons - RocketScott - 05-23-2021, RE: Changing Pistons - Rawze - 05-23-2021, RE: Changing Pistons - RocketScott - 05-23-2021, RE: Changing Pistons - Rawze - 05-23-2021 RE: Changing Pistons - RocketScott - 05-23-2021, RE: Changing Pistons - RocketScott - 05-23-2021, RE: Changing Pistons - Nilao - 05-23-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.