EPA21 X15

[Rawze]

I use Insite 7.6 and CT 3.17 on X15's. I even use it with my inline-5 adapter.

it is not the best solution, I can only read codes with the insite and look them up on quickserv as the fault code descriptions do not always match... but it works.

As far as CT goes, 3.17 is just fine.

As far as the adapter, i have the slower older inline-5 .. some trucks I have to hook up out on the engine side (the 3 pin weather-pack connector) because of my slower adapter, but it works.

---

At some point I do need to get an inline 6 or 7 ... and insite 8, so that i can flash an X15 with Insite ... but I have just not really needed it yet. I have been using CT to flash for now instead.