CM 2250 clutch replacement |
06-01-2021, (Subject: CM 2250 clutch replacement ) Post: #3 | |||
| |||
RE: CM 2250 clutch replacement Could just be the clutch brake. You don't have to drop the trans to replace one so it's worth looking at. Is it the original clutch with 820K miles? Is the slave cylinder leaking fluid? Maybe that's where the fluid is going? If that's the case you need a new slave cylinder yesterday because it WILL leave you stranded waiting on a tow truck. Also, if you do end up needing a clutch you'll also need to reseal the rear structure and replace motor mounts etc. While your at it. Don't skip this stuff or you'll regret it when you have to do all the same labor over again in 3 months. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
CM 2250 clutch replacement - gemarsim - 06-01-2021, RE: CM 2250 clutch replacement - snailexpress - 06-01-2021, RE: CM 2250 clutch replacement - tree98 - 06-01-2021 RE: CM 2250 clutch replacement - RollinCoal - 06-01-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.