Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Cummins Reman Turbo

new reply
Cummins Reman Turbo
08-25-2016, (Subject: Cummins Reman Turbo ) 
Post: #2
in2trux Offline
HMR-Contrinbuting V.I.P.  (193 Likes)  *****

 		Posts: 479
Joined: May 2014
Thanks: 217
Given 193 thank(s) in 90 post(s)
RE: Cummins Reman Turbo
I guess that depends on how far home is. Running empty or very light, no mountains,
If you can keep the boost at a minimum,I might take the chance.
If you have oil on the intake side its bad already. That seal opens up anymore and it could run away.
Have a board or something to block the intake just in case.

CAC is going to need to be flushed good.

User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
Return to Top | find
replyreply
new reply


Messages In This Thread
Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - in2trux - 08-25-2016
RE: Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - axe - 08-25-2016,
RE: Cummins Reman Turbo - Vin - 08-25-2016,
RE: Cummins Reman Turbo - axe - 08-26-2016,
RE: Cummins Reman Turbo - Matt - 12-29-2016,
RE: Cummins Reman Turbo - Unilevers - 12-29-2016,
RE: Cummins Reman Turbo - Cuya - 02-24-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication