Cm2350 injector coil resistance |
06-04-2021, (Subject: Cm2350 injector coil resistance ) Post: #2 | |||
| |||
RE: Cm2350 injector coil resistance (06-04-2021 )Lonestar10 Wrote: Does anyone know the stock resistance of the injector coils? The higher my fuel pressure gets the more of a skip I get so I've got an injector that's acting stupid or two but it holds fuel pressure like a champ barely loses anything so it's not a leak down issue so I'm thinking it might be possibly one of the injector coils just failing.You can run injector performance test to check which injector is failing. Then move injectors to other cylinder. Don't forget to change injector codes in Insite. If failing follows with injector so injector is bad, if same cylinder fail look in to ESM or injector harness or valves. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm2350 injector coil resistance - Lonestar10 - 06-04-2021, RE: Cm2350 injector coil resistance - snailexpress - 06-04-2021 RE: Cm2350 injector coil resistance - Lonestar10 - 06-04-2021, RE: Cm2350 injector coil resistance - snailexpress - 06-04-2021, RE: Cm2350 injector coil resistance - Lonestar10 - 06-04-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.