A BAD DELETE?

[tree98]

If you have an 871 or 2250 you can do the programming yourself if you have a laptop with c a l t e r m and an inline device.

You'll need either the @m*m^2 or Africa overlay depending on which engine you have. Both of these can be found online for free.

For the mechanical side of it you'll need to Hollow out the cans COMPLETELY, replace imap and exhaust pressure sensors (preferably before starting it after the demandate) to ensure accurate exhaust and intake pressure engine feedback. , install a block plate to keep egr gas from getting into the intake, install maintenance free crankcase filter. Install boost and pyro gauge or boost at the very least.

If you don’t want to bother trying to figure out the programming side of it or you have an 870,2350 or X15 just PM running rough here on the forum and he can do it for you remotely. You'll still need an inline adapter and laptop though.

If you were going to take it to a shop, the ONLY shop in the USA to take it to is Mr hagg down in Georgia.