| Exhaust brake |
| 06-05-2021, (Subject: Exhaust brake ) Post: #4 | |||
| |||
RE: Exhaust brake (06-05-2021 )Badgerx Wrote: Sorry took so long to reply, but my boost shows about 18psi Make sure Insite is showing the solenoids being activating when testing the engine... at least verify that the ecm is operating them. (for CM870)... 18 is a touch low, depends on the situation, rpm, and load on the engine too. Maybe pressurize the whole engine up to 30 psi using some block plates front and back of turbo, and check for leaks. Could also be a worn out head, allowing for some compression losses. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Exhaust brake - Badgerx - 06-01-2021, RE: Exhaust brake - Rawze - 06-01-2021, RE: Exhaust brake - Badgerx - 06-05-2021, RE: Exhaust brake - Rawze - 06-05-2021 RE: Exhaust brake - Ricky - 06-05-2021, RE: Exhaust brake - Rawze - 06-05-2021, RE: Exhaust brake - Ricky - 06-05-2021, RE: Exhaust brake - Chamberpains - 06-05-2021, RE: Exhaust brake - Ricky - 06-05-2021, RE: Exhaust brake - Chamberpains - 06-05-2021, RE: Exhaust brake - Chamberpains - 06-05-2021, RE: Exhaust brake - Ricky - 06-05-2021, RE: Exhaust brake - Chamberpains - 06-06-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.