Cm2250 Won't prime/no fuel in water separator
06-09-2021, (Subject: Cm2250 Won't prime/no fuel in water separator ) 
Post: #2
RE: Cm2250 Won't prime/no fuel in water separator
Maybe pressurize the fuel tanks to 10 psi (via the bleeder tubes) and let it sit for an hour... see if there are any fuel line leaks. CAUTION: whatever you do ... If you have pressurized the fuel tanks up to check for leaks ... NEVER try to open the fuel caps if the tanks are pressurized. It is usually enough force to break bones in your hand or severely injure someone as the cap jumps off.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Cm2250 Won't prime/no fuel in water separator - Rawze - 06-09-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.