| Oil Temp Gauge Install? |
| 06-16-2021, (Subject: Oil Temp Gauge Install? ) Post: #9 | |||
| |||
| RE: Oil Temp Gauge Install? I dont have the insite software to see what the engine is reading. I was just hoping to find a bung in the block that has an oil passage that I can access. I know there are quite a few on the oil cooler, but im not sure if any are before or after the cooler, and where the proper place to monitor would be.. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Oil Temp Gauge Install? - Drichardson1987 - 06-05-2021, RE: Oil Temp Gauge Install? - tree98 - 06-05-2021, RE: Oil Temp Gauge Install? - Drichardson1987 - 06-05-2021, RE: Oil Temp Gauge Install? - Rawze - 06-06-2021, RE: Oil Temp Gauge Install? - tree98 - 06-05-2021, RE: Oil Temp Gauge Install? - Rawze - 06-06-2021, RE: Oil Temp Gauge Install? - Drichardson1987 - 06-09-2021, RE: Oil Temp Gauge Install? - tree98 - 06-10-2021, RE: Oil Temp Gauge Install? - Drichardson1987 - 06-16-2021 RE: Oil Temp Gauge Install? - Rawze - 06-16-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.