| Regen question |
| 06-22-2021, (Subject: Regen question ) Post: #7 | |||
| |||
RE: Regen question (06-22-2021 )Tqr6 Wrote: Ok it is a wiring issue,apparently the wires that come from the ecm have chaffed inside the loom from not being properly zipped tied and or secured when I had engine work done,it was riding in the back of the valve cover and has eaten though,I have started repairing wires and got it to regen, but if the loom moves I lose temps so I will have to chase the whole harness from the ecm to the fire wall on the passenger side, hope this helps anyone else..! If that loom is really chewed up, you may want to contact the dealer and price out a new one. To properly repair you may have to remove it from the motor. Problem is, the voltages are so small that run through many of these wires, and with age these voltages and repairs do not play well together and bad things happen. Personally, I think I would be buying a new harness. User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Regen question - Tqr6 - 06-09-2021, RE: Regen question - JimT - 06-09-2021, RE: Regen question - Nilao - 06-10-2021, RE: Regen question - Tqr6 - 06-11-2021, RE: Regen question - Nilao - 06-11-2021, RE: Regen question - Tqr6 - 06-22-2021, RE: Regen question - Waterloo - 06-22-2021 RE: Regen question - Rawze - 06-23-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.