Flashing green fan ovrd switch

[DVT873]

If the fuses are good might be the board. Sometime the micro switches, those are the two little buttons you see if you take the actuator/rocker switch out, go bad. They are part of the board. Usually means replacement of the switch pack.

BUT there are usually some unused positions. Diamond Logic Builder (DLB) the body computer software program can be used to change the location. It is literally drag and drop. Then you put the actuator in the new position.

If you cannot get access to DLB the microswitches can probably be unsoldered and some from an unused position can be put in. The switch pack is at least several hundred dollars.

The VIN would let me see the configuration.