New crank damper
06-29-2021, (Subject: New crank damper ) 
Post: #2
RE: New crank damper
If ti is more than 500k miles old then it needs replacing.

However, I have never seen one that I could not find the marks on. A dremel tool with sanding disk wheel is your friend.


Find a single mark, A,B, or C .. and put a sharpie mark on the front face of the damper at the line.... then turn engine until the mark on the front face of the damper is facing straight down towards the ground... you will roughly be aligned near the next mark location.. use the dremel to find it... repeat again till you get all 3.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: JMBT


Messages In This Thread
New crank damper - earnies2 - 06-29-2021,
RE: New crank damper - Rawze - 06-29-2021
RE: New crank damper - Rawze - 07-01-2021,
RE: New crank damper - W9L - 07-04-2021,
RE: New crank damper - Rawze - 07-04-2021,
RE: New crank damper - JimT - 07-04-2021,
RE: New crank damper - W9L - 07-04-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.