Cm2250
07-04-2021, (Subject: Cm2250 ) 
Post: #7
RE: Cm2250
(07-04-2021 )Waterloo Wrote:  Really? Never heard of that, and we have more than a few guys from OZ that are members here. Well, this is one for Rawze, he is going to be your best bet, as he does know about these motors. I would shoot Rawze a copy of the file out of the ECM and see what is really going on in there.

Yeh mate there called an e5 or x15 here and there pretty basic. I will have to send rawze a copy and see what he thinks.
replyreply
 Thanks given by: Waterloo


Messages In This Thread
Cm2250 - Bale309 - 07-04-2021,
RE: Cm2250 - Waterloo - 07-04-2021,
RE: Cm2250 - Bale309 - 07-04-2021,
RE: Cm2250 - Waterloo - 07-04-2021,
RE: Cm2250 - Bale309 - 07-04-2021,
RE: Cm2250 - Waterloo - 07-04-2021,
RE: Cm2250 - Bale309 - 07-04-2021
RE: Cm2250 - Rawze - 07-04-2021,
RE: Cm2250 - Bale309 - 07-04-2021,
RE: Cm2250 - Rawze - 07-07-2021,
RE: Cm2250 - Bale309 - 07-07-2021,
RE: Cm2250 - Rawze - 07-07-2021,
RE: Cm2250 - Bale309 - 07-07-2021,
RE: Cm2250 - Bale309 - 07-07-2021,
RE: Cm2250 - Rawze - 07-07-2021,
RE: Cm2250 - Bale309 - 07-07-2021,
RE: Cm2250 - Rawze - 07-07-2021,
RE: Cm2250 - Bale309 - 07-04-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.