I work on very big VGT's

new reply

Threaded Mode | Linear Mode

I work on very big VGT's

07-05-2021, (Subject: I work on very big VGT's )

Post: #5

Wildcard Offline

Contributing Member (35 Likes)

Posts: 59
Joined: Jan 2020

Thanks: 3
Given 35 thank(s) in 24 post(s)

RE: I work on very big VGT's

Here is a couple 250 ton variable speed AirCooled rotary screw compressor chillers. There was some Metallurgy issues in the condenser fins, these being in a salt environment and having epoxy coated coils. The epoxy was popping off. So I had to replace all the coils.

Attached File(s)Image(s)
./uploads/202107/post_4787_1625499217_d7afacc1644fdac2fdb1aaec332ef722.jpeg

./uploads/202107/post_4787_1625499231_e864cb39dff6179e128d86f3541c205a.jpeg

./uploads/202107/post_4787_1625499244_17ebbc454d6163f81db7942356627b2e.jpeg

./uploads/202107/post_4787_1625499258_8a3e189191f26a1fde9191c117e4e40c.jpeg

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

I work on very big VGT's - Wildcard - 07-03-2021,

RE: I work on very big VGT's - Wildcard - 07-04-2021,

RE: I work on very big VGT's - Rawze - 07-04-2021,

RE: I work on very big VGT's - Wildcard - 07-05-2021,

RE: I work on very big VGT's - Rawze - 07-05-2021,

RE: I work on very big VGT's - Wildcard - 07-06-2021,

RE: I work on very big VGT's - Wildcard - 07-05-2021

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.