Cm2350 high commanded vgt |
07-12-2021, (Subject: Cm2350 high commanded vgt ) Post: #34 | |||
| |||
RE: Cm2350 high commanded vgt (07-07-2021 )Rawze Wrote:(07-07-2021 )Carhauler Wrote: Well just to update, got tired of worrying about it. It’s been doing ok. Fuel mileage is horrendous but it’s do for the filter to be baked and de ashed. It’s going on on Monday. Going to have them change sensors on the dpf. Some days it runs great, pulls hills great. Then hours later it will be a turd. I’m getting a new truck within the next couple months with a paccrap. So as long as it makes it that long As mentioned before, I don’t own the truck. I’ve exhausted many hours working on it myself. I could pull the dpf myself or take it to Peterbilt by my house. So instead of being stuck at our shop that’s 3 hrs from home, I chose to let the dealer do the maintenance so I could spend time with my 6 yo daughter. I already take care of it as if it was mine. And am by no means wanting to give up on it. But there becomes a point when you don’t own something, time, and money lost from tinkering. I got the truck and it was neglected, I have done a few egr tuneups, changed the doc and dpf, all the sensors mainly on my own as a driver. I do most of the maintenance. It’s also a carhauler, so it’s beneficial getting a newer truck due to the trailer and rack starts to become a money pit and just worn out. This truck isn’t getting sold. It just gets another driver in our small fleet. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.