Isx liner help |
07-29-2021, (Subject: Isx liner help ) Post: #2 | |||
| |||
RE: Isx liner help (07-29-2021 )Jchism3406 Wrote: I removed my just because the orig. ones did not have shims does not mean much. assuming this is an ISX ... If you do not cut the counter-bores and shim the liners up to 0.015" then you will not extend the life of the engine. here is a list of extra things to always do to extend the engine life and build it, that are not covered in the manuals/quickserv. ref: http://rawze.com/forums/showthread.php?t...9#pid56299 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Isx liner help - Jchism3406 - 07-29-2021, RE: Isx liner help - Rawze - 07-29-2021 RE: Isx liner help - Jchism3406 - 07-29-2021, RE: Isx liner help - Signature620 - 07-29-2021, RE: Isx liner help - Jchism3406 - 07-30-2021, RE: Isx liner help - Mr Hagg - 07-30-2021, RE: Isx liner help - RollinCoal - 07-30-2021, RE: Isx liner help - RocketScott - 07-30-2021, RE: Isx liner help - Rawze - 07-31-2021, RE: Isx liner help - RocketScott - 07-31-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.