ISX 12 spooling at idle
08-03-2021, (Subject: ISX 12 spooling at idle ) 
Post: #3
RE: ISX 12 spooling at idle
(08-03-2021 )lwilder27 Wrote:  Hey guys, new to the Forum.

I have an ISX12 CM2250 that will spool up to 5-10psi at idle for a few seconds and then go away. Happens frequently, about every 10 seconds. I unplugged the EGR valve and then it idles smoothly. I replaced the Delta P sensor and cleaned the ports but no difference. I compared EGR readings to a sister truck and nothing stood out to me. Where should I be looking next?

Not sure if it is relevant but I had a simular issue on a CM871. It was a real anoyance when reversing on to a dock.

The exhaust pressure sensor tube was blocked.

As mentioned, Insite is your friend.
replyreply
 Thanks given by: Rawze , Techmech


Messages In This Thread
RE: ISX 12 spooling at idle - alamow - 08-03-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.