X15 air compressor Intake relocation.
08-11-2021, (Subject: X15 air compressor Intake relocation. ) 
Post: #5
RE: X15 air compressor Intake relocation.
(08-11-2021 )Jackmup Wrote:  Has anyone relocated air compressor Intake line from the intake manifold to fresh air. 2019 kw on it's 3rd air dryer and countless other valves. Changing cartridges constantly.

Problems... when we got the truck it was loaded with water. the main line from compressor to air dryer was too short from factory, a Kenworth issue. Compressed water vapor was too hot to be captured by filter cartridge. Loading the tanks with water. So I made one 5' longer. But the amount of soot in the cartridge and dryer isn't helping either.
I want to relocate the compressors air intake line from the engine intake to fresh air and looking for ideas.
I'm thinking of fabricating pipe to a seperate air filter.
Thanks

If your getting excess soot into the air compressor then your getting excess soot into the engine too... PERFORM AN EGR TUNE-UP and keep after things regularly so that excess soot does not end up into the intake and the DPF system.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: X15 air compressor Intake relocation. - Rawze - 08-11-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.