Pipe sealant or teflon tape

[Rawze]

(08-28-2021 )JimT Wrote:  Rawze, on a slightly related note, what exactly was the sealant you had me apply at the corners of my oil pan? I need to remove the pan to repaint it and that stuff worked great last time. No leaks from any corner.

It was a non-setting (does not dry or harden) sealant. It was this stuff...
https://amzn.to/3zqe4bN

It sort of resembles sticky-wet paper. Stays tacky, even in the oil environment. Does not dry.

We packed it into the 4 corners where the block meets the front and rear structures ... where you would normally have to silicone it. It makes it to where you can re-use the oil pan gasket if needed, as they are expensive to replace.