Swap 10spd to 13spd
10-05-2021, (Subject: Swap 10spd to 13spd ) 
Post: #15
RE: Swap 10spd to 13spd
The purpose of the rear change is to take the stress of a full load off the Engine AND the little transmission gears.

3:55 are nice 48 state general freight hauler gears but if you see any of the 2 major mountain ranges or those God awful Ozarks for the majority of your operation 3:73 or better will do better.
replyreply
 Thanks given by: Rawze , Precisionw900 , superbudy208 , medicsaps


Messages In This Thread
RE: Swap 10spd to 13spd - Chamberpains - 10-05-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.