EGTs and Gauge

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-25-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

EGTs and Gauge

10-14-2021, (Subject: EGTs and Gauge )

Post: #1

NDISX15 Offline

Offline

Established (36 Likes)

Posts: 85
Joined: Sep 2021

Thanks: 41
Given 36 thank(s) in 28 post(s)

EGTs and Gauge

Got my pyrometer installed today finally. Settled on a location for the probe that is against the exhaust side of the turbo housing at the inlet against the housing, where it can't really be exposed to much of if any cooler air temps.

Just wanted to verify a couple things I know I've read but can't remember where. Im wanting to get some longevity out of this motor and its components the best I can.

First, the turbo housing can only handle 1350F for 3 min, correct?

Second, a safe shutdown temp for the turbo. Prior to the gauge ive always just idled until my oil temp was down to 185-200F before shutting down. Now with this gauge, I want to say 300-400F or lower is safe?

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

EGTs and Gauge - NDISX15 - 10-14-2021

RE: EGTs and Gauge - Rawze - 10-14-2021,

RE: EGTs and Gauge - NDISX15 - 10-25-2021,

RE: EGTs and Gauge - Rawze - 10-26-2021,

RE: EGTs and Gauge - NDISX15 - 10-26-2021,

RE: EGTs and Gauge - NDISX15 - 10-15-2021,

RE: EGTs and Gauge - GhostHauling - 10-15-2021,

RE: EGTs and Gauge - Rawze - 10-15-2021,

RE: EGTs and Gauge - NDISX15 - 10-16-2021,

RE: EGTs and Gauge - GhostHauling - 10-16-2021,

RE: EGTs and Gauge - NDISX15 - 10-18-2021,

RE: EGTs and Gauge - tree98 - 10-26-2021,

RE: EGTs and Gauge - NDISX15 - 10-26-2021,

RE: EGTs and Gauge - tree98 - 10-26-2021,

RE: EGTs and Gauge - NDISX15 - 10-26-2021,

RE: EGTs and Gauge - GhostHauling - 10-27-2021,

RE: EGTs and Gauge - NDISX15 - 10-28-2021,

RE: EGTs and Gauge - GhostHauling - 10-28-2021,

RE: EGTs and Gauge - Rawze - 10-28-2021,

RE: EGTs and Gauge - amermextrucker - 10-30-2021,

RE: EGTs and Gauge - GhostHauling - 10-30-2021,

RE: EGTs and Gauge - amermextrucker - 10-31-2021,

RE: EGTs and Gauge - NDISX15 - 10-31-2021,

RE: EGTs and Gauge - GhostHauling - 10-31-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design