EGTs and Gauge
10-15-2021, (Subject: EGTs and Gauge ) 
Post: #3
RE: EGTs and Gauge
That was the other thing I had wondered was if I was accurately measuring the case temp, or if there was going to be an offset to the temps from the probe not being in the manifold itself. I have what I would consider great airflow thru the engine compartment, so I dont suspect that to be much of an issue. Empty at 65k lbs, the highest I saw was about 750F when I was getting on the interstate heading home after installation with a 540/1850 tune. Otherwise it ran 75 mph like nothing at about 450-500F with a crosswind of about 20 mph.
replyreply


Messages In This Thread
EGTs and Gauge - NDISX15 - 10-14-2021,
RE: EGTs and Gauge - Rawze - 10-14-2021,
RE: EGTs and Gauge - NDISX15 - 10-25-2021,
RE: EGTs and Gauge - Rawze - 10-26-2021,
RE: EGTs and Gauge - NDISX15 - 10-26-2021,
RE: EGTs and Gauge - NDISX15 - 10-15-2021
RE: EGTs and Gauge - Rawze - 10-15-2021,
RE: EGTs and Gauge - NDISX15 - 10-16-2021,
RE: EGTs and Gauge - NDISX15 - 10-18-2021,
RE: EGTs and Gauge - tree98 - 10-26-2021,
RE: EGTs and Gauge - NDISX15 - 10-26-2021,
RE: EGTs and Gauge - tree98 - 10-26-2021,
RE: EGTs and Gauge - NDISX15 - 10-26-2021,
RE: EGTs and Gauge - NDISX15 - 10-28-2021,
RE: EGTs and Gauge - Rawze - 10-28-2021,
RE: EGTs and Gauge - NDISX15 - 10-31-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.