Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / The Bragging Channel... / MM kicks the teeth out of {name removed} (repost from old forum) ...

new reply
MM kicks the teeth out of {name removed} (repost from old forum) ...
08-31-2016, (Subject: MM kicks the teeth out of {name removed} (repost from old forum) ... ) 
Post: #6
in2trux Offline
HMR-Contrinbuting V.I.P.  (193 Likes)  *****

 		Posts: 479
Joined: May 2014
Thanks: 217
Given 193 thank(s) in 90 post(s)
RE: MM kicks the teeth out of {big-name trash tuning} (repost from old forum) ...
(08-31-2016 )Rawze Wrote:  ===============



Its too bad those guys they had hired did not properly correct the injection timing, nor compensated for interpolation properly, or they could have gotten even more power out of the engine. The owner of the truck was happy with the 950 HP to the tires, and didn't want it mapped higher, so the rest of the tune was left alone.

Was that linear, non linear or polynomial interpolation?
How deep is this rabbit hole?


Attached File(s)Image(s)
./uploads/201608/post_65_1472680507_bc3ab201c4c211e2c0b1f6699333e343.jpg

User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
Return to Top | find
replyreply
 Thanks given by: snailexpress
new reply


Messages In This Thread
RE: MM kicks the teeth out of {big-name trash tuning} (repost from old forum) ... - in2trux - 08-31-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication