| ABS Sensor connector |
| 10-22-2021, (Subject: ABS Sensor connector ) Post: #1 | |||
| |||
| ABS Sensor connector I have a 2012 KW W900 that I need the abs wheel speed sensor connector for the chassis side of the harness. The instructions with the sensor call it a "standard round 2pin connector". It is a male connector, I need the connector shell, terminals, and seal. Kenworth dealer says they don't have access to the part numbers because kenworth does not want anybody repairing the harness because of liability but want you to replace the harness. I refuse to give in and spend they're $1800. However in the parts book they give me a connector part# P20-6064 but that is the shell only. Anybody know where I can get the terminals and seals to repair this? | |||
(Online)
| « Next Oldest | Next Newest » |
| Messages In This Thread |
ABS Sensor connector - Truckdriven - 10-22-2021 RE: ABS Sensor connector - tree98 - 10-22-2021, RE: ABS Sensor connector - Truckdriven - 10-22-2021, RE: ABS Sensor connector - snailexpress - 10-22-2021, RE: ABS Sensor connector - Chamberpains - 10-23-2021, RE: ABS Sensor connector - Truckdriven - 10-23-2021, RE: ABS Sensor connector - Chamberpains - 10-23-2021, RE: ABS Sensor connector - Truckdriven - 10-23-2021, RE: ABS Sensor connector - snailexpress - 10-23-2021, RE: ABS Sensor connector - Chamberpains - 10-23-2021, RE: ABS Sensor connector - JMBT - 10-25-2021, RE: ABS Sensor connector - Truckdriven - 11-08-2021, RE: ABS Sensor connector - Chamberpains - 11-08-2021, RE: ABS Sensor connector - Truckdriven - 11-08-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.