871 mess

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

871 mess

10-24-2021, (Subject: 871 mess )

Post: #7

Nostalgic Offline

Offline

Contributing Member (546 Likes)

Posts: 628
Joined: Apr 2017

Thanks: 664
Given 546 thank(s) in 286 post(s)

RE: 871 mess

(10-24-2021 )Rawze Wrote: I don't know where you got that top picture but that is NOT right at all for ISX. Maybe a smaller engine, who knows ... Even my old manual from 2007 says 160-Ft.Lbs then 90-degrees.. this is what I set all of them to (CM570, CM870, CM871).

(this is from the 2007 ISX service manual) ...

I got it straight off of quickserve service with my ESN. I'll save the pages to PDF and print them out to use in the shop so I'm not fingerprinting up my ipad.

Top one has a end of page date of Mar-2020 and I saved it from quickserve in July 2020. The 160/90degree one from today has a end of page date of June 2006.

I have the full procedure in PDF of each, so no clue as to why or how.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

871 mess - CANNONBALL - 10-23-2021,

RE: 871 mess - Nostalgic - 10-23-2021,

RE: 871 mess - CANNONBALL - 10-23-2021,

RE: 871 mess - Nostalgic - 10-23-2021,

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - Nostalgic - 10-24-2021

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - tree98 - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Running rough - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Mr Hagg - 10-25-2021,

RE: 871 mess - Rawze - 10-25-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design