Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Pete & KW related Help... / vibration damper thoughts

new reply
vibration damper thoughts
10-30-2021, (Subject: vibration damper thoughts ) 
Post: #52
GhostHauling Offline
Established  (53 Likes)  **

 		Posts: 161
Joined: Oct 2020
Thanks: 37
Given 53 thank(s) in 31 post(s)
RE: vibration damper thoughts
It doesn’t appear to be used I don’t see bolt marks but I’m no expert it’s painted now. I made it as far as trying to break one bolt loose and the Engine turned counter-clockwise a smidge so I called it a day and cleaned up it started raining. I haven’t seen anyone mention how they stopped the crank from spinning? Do I need a dowel pin to pin the crank or just leave the breaker bar on the Crank turning port to hold why breaking them loose ?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: vibration damper thoughts - GhostHauling - 10-30-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication