N14 celect plus rebuilt

[Chamberpains]

(11-11-2021 )RollinCoal Wrote:  IF you want to add a bit of lubricate to the fuel 2 stroke oil is alot better route IN SMALL amounts, 1qt per 30ish gal of fuel
BUT this is in reguards of older engines that actually use the fuel to lube the fuel pump it self (pre emmisions)

A quart per 30 gallons (1:120) seems like a lot. I would be adding over 2 gallons every fuel up (~260 gallons) to hit that ratio. Sounds like a big expense and I'd be afraid of ramming that much oil through the high pressure injectors.

Wouldn't a quart of Howells or any other fuel lubricant be much more cost effective too?