| new acuators |
| 09-02-2016, (Subject: new acuators ) Post: #8 | |||
| |||
| RE: new acuators fired it up kicked and bucked for about 2 minutes smoothed out but no leaks. still holding off on others till find out if I have to omit gasket plate with o ring style actuators. seems like without gasket plate lot of dirt could squeeze in there? as far as shimming oil pump only ran it for about 5 minutes so no heat yet but brought it up to 1200 rpm and it hit 56 lbs. idle was 44 but still cold, let you know once I go back out. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
new acuators - slowpoke - 08-31-2016, RE: new acuators - 1mattrichert - 08-31-2016, RE: new acuators - Unilevers - 08-31-2016, RE: new acuators - slowpoke - 08-31-2016, RE: new acuators - slowpoke - 08-31-2016, RE: new acuators - slowpoke - 09-01-2016, RE: new acuators - Rawze - 09-01-2016, RE: new acuators - slowpoke - 09-02-2016 RE: new acuators - Rawze - 09-02-2016, RE: new acuators - slowpoke - 09-02-2016, RE: new acuators - preacherboy24 - 09-02-2016, RE: new acuators - slowpoke - 09-02-2016, RE: new acuators - Waterloo - 09-03-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.