CM870 oil pressure low. jakes not working

[Rawze]

(12-02-2021 )jjoshthomas074 Wrote:  ....

OEM cummins parts installed, bearings were checked as they came out. i did not plastigue anything, old bearings pulled were Cummins OEM as well.

I am putting this here for reference:

Someone needs to always be VERY VERY careful about checking rod/main bearings, each one as they come out, very closely... and verifying part #s individually.. here is some more detail is why I stated/asked what I did...

ref: http://rawze.com/forums/showthread.php?t...5#pid32065