Michelin XDA Energy or Bridgestone M713 drives?

[SquareOne]

Over-inflation is more of a fit to this particular issue. I'm the only one that runs the truck so I know exactly how it is being treated. High torque wouldn't apply here.

The other drives these replaced did not have an issue like this, but again, no where near as much siping or tread depth. I ran those at max psi as well from the very beginning. The tread pattern was very different as well, full longhaul steer tread design (actually they were steer tires). The profile was much flatter as opposed to the rounded profile of the M713's.