Oil pan T joint sealants |
12-24-2021, (Subject: Oil pan T joint sealants ) Post: #2 | |||
| |||
RE: Oil pan T joint sealants I always use the right stuff in the corners, and it just about holds the gasket when I drop the pan. Next time I’m going to add a few dabs on the long sides with hope the gasket just stays on the block when I drop the pan. As long as it doesn’t break free from any gasketed parts it should seal ok? | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Oil pan T joint sealants - JMBT - 12-24-2021, RE: Oil pan T joint sealants - Nostalgic - 12-24-2021 RE: Oil pan T joint sealants - SemiSweet - 12-24-2021, RE: Oil pan T joint sealants - JMBT - 12-25-2021, RE: Oil pan T joint sealants - JMBT - 12-25-2021, RE: Oil pan T joint sealants - Nostalgic - 12-25-2021, RE: Oil pan T joint sealants - JMBT - 12-25-2021, RE: Oil pan T joint sealants - Nostalgic - 12-25-2021, RE: Oil pan T joint sealants - Signature620 - 12-25-2021, RE: Oil pan T joint sealants - Nostalgic - 12-25-2021, RE: Oil pan T joint sealants - JMBT - 12-26-2021, RE: Oil pan T joint sealants - Nostalgic - 12-26-2021, RE: Oil pan T joint sealants - JMBT - 12-26-2021, RE: Oil pan T joint sealants - Rawze - 12-26-2021, RE: Oil pan T joint sealants - kozakvod - 12-27-2021, RE: Oil pan T joint sealants - Nostalgic - 12-27-2021, RE: Oil pan T joint sealants - Rawze - 12-28-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.