(01-13-2022 )Hermjeji Wrote: Likelihood of another injector failing?
- Nov 2021, same codes, pass through connector passes with resistance check, injector #5 fails at solenoids. Injector #5 replaced, codes gone.
- Jan 2022, same codes, pass through connector fails, pass through replaced, codes still present. ECM swapped for check due to observation of significant oil at pass through connector, no change in codes. Injector #6 fails at solenoids. Injector#6 to be replaced.
Is this just bad luck? Or is something causing those solenoids to be less than 100k ohms.
Swap rear bank injectors to the front and if codes moves to the front you have bad injectors. Otherwise something in wiring. It's not hard to check resistance to verify and compare all six injectors.
