ISX15 ECM

[Rawze]

You did not mention what year/make of engine, truck, etc. by the way. More specific info would help.



Otherwise, generally speaking, to trasfer the truck specific settings....

If you can still connect to the old ecm with Insite, then all you have to do is make a work order, an ecm image, and then ecm template to back up all the truck specific settings.

then when u install the new ecm, you need to flash it with the correct software for that ser# engine, as specified on Quickserv.. Then restore the template backup that you made, so that it will restore all the truck specific settings.