M100 steering pump input shaft seal leaking |
02-18-2022, (Subject: M100 steering pump input shaft seal leaking ) Post: #9 | |||
| |||
RE: M100 steering pump input shaft seal leaking I replaced just the outer seal on mine. You just knock in the new one with a socket or something. I had a brain malfunction and gouged it all up getting it out, instead of just drilling a small hole in it and putting a screw in it and prying it out. But I was able to fill in the gouges in the outer walls of the opening with a tiny amount of JB Weld, then install the seal and it’s been ok. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
M100 steering pump input shaft seal leaking - Redland1 - 02-16-2022, RE: M100 steering pump input shaft seal leaking - Nostalgic - 02-16-2022, RE: M100 steering pump input shaft seal leaking - Redland1 - 02-16-2022, RE: M100 steering pump input shaft seal leaking - Nostalgic - 02-16-2022, RE: M100 steering pump input shaft seal leaking - Rawze - 02-17-2022, RE: M100 steering pump input shaft seal leaking - Redland1 - 02-18-2022, RE: M100 steering pump input shaft seal leaking - Rawze - 02-19-2022, RE: M100 steering pump input shaft seal leaking - Redland1 - 02-19-2022, RE: M100 steering pump input shaft seal leaking - Yauchout - 02-17-2022, RE: M100 steering pump input shaft seal leaking - Redland1 - 02-18-2022, RE: M100 steering pump input shaft seal leaking - Mrkentee - 02-18-2022 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.