Vent glass |
02-20-2022, (Subject: Vent glass ) Post: #6 | |||
| |||
RE: Vent glass (02-20-2022 )Ricky Wrote:The adhesive I used. it(02-18-2022 )Ricky Wrote:So I bought the glass at the steelership 278.00 and the adhesive at O'Reilly 38.00. It took about an hour, steelership body shop wanted to charge two hours. Plus they couldn't do it for like three weeks. Once the glass was out I used a small pry bar to loosen up the frame and it came right out. I cleaned it up and put the adhesive on the new glass and it slipped right in. I was worried about it going back in under my drop visors but not a problem.(02-18-2022 )Yauchout Wrote: if its the same as my lonestar it removes from the outside cut the glue from the inside like you would a windshield I had safelite do mine because I was on the road and it fell inI believe that they are the same as the Lonestar. I spoke with the body shop at international and they said it goes in from the outside and is glued in. I have the new window and the rubber seal it's glued to. I will post pictures when I do it this weekend. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Vent glass - Ricky - 02-16-2022, RE: Vent glass - Chamberpains - 02-18-2022, RE: Vent glass - Yauchout - 02-18-2022, RE: Vent glass - Ricky - 02-18-2022, RE: Vent glass - Ricky - 02-20-2022, RE: Vent glass - Ricky - 02-20-2022 RE: Vent glass - Rawze - 02-21-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.