CM2350 Air compressor install

[Rawze]

(03-19-2022 )DPS567180 Wrote:  Thank you for the info I appreciate it. Unfortunately I don't have access to a way to pull a vacuum or even access to a shop compressor . Is there a way that I can go to a hardware store and find something to screw and plug those lines while replacing the compressor?

u can get a vacuum pump at harbor freight or some other place.
ref: https://www.harborfreight.com/25-cfm-vac...61245.html

and radiator adapter similar to this one:
https://amzn.to/3N3YKZh

Make up a piece of hose to adapt to it and go at it... just make sure you do not let the coolant get into the vacuum pump by watching the resivor level on the truck, or you will have to replace the oil in the vacuum pump.

This is all I ever use when I am helping someone, and it is very effective.