CAT 3126B no start |
04-04-2022, (Subject: CAT 3126B no start ) Post: #1 | |||
| |||
CAT 3126B no start Here's one for ya: FL80 with a CAT 3126B, E.S.N.#7AS-----, complete reman engine, dyno tested, came with all new sensors, covers, etc. Replaced the engine harness due to too many rubbed spots. Shows 850-900 psi IAP. Fuel flows from return line while cranking. Injector solenoid tests show all are good. Engine is turning at least 150 RPM, but ECM only shows 38 RPM(occasionally 40). Test ECM made no difference. Re-installing old timing sensors made no difference. No smoke, no fire. I'm lost. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
CAT 3126B no start - Smokin64 - 04-04-2022 RE: CAT 3126B no start - Rawze - 04-04-2022, RE: CAT 3126B no start - RollinCoal - 04-04-2022, RE: CAT 3126B no start - Aussie Steve - 04-06-2022, RE: CAT 3126B no start - Aussie Steve - 04-06-2022, RE: CAT 3126B no start - Smokin64 - 04-06-2022, RE: CAT 3126B no start - Smokin64 - 04-06-2022, RE: CAT 3126B no start - Aussie Steve - 04-06-2022, RE: CAT 3126B no start - Smokin64 - 04-07-2022, RE: CAT 3126B no start - Aussie Steve - 04-08-2022, RE: CAT 3126B no start - Smokin64 - 04-12-2022, RE: CAT 3126B no start - DVT873 - 04-12-2022, RE: CAT 3126B no start - Smokin64 - 04-19-2022, RE: CAT 3126B no start - Aussie Steve - 04-20-2022, RE: CAT 3126B no start - Aussie Steve - 04-20-2022, RE: CAT 3126B no start - Aussie Steve - 04-20-2022, RE: CAT 3126B no start - Smokin64 - 04-22-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.