Helping JimT out with an inframe ...

[Chamberpains]

Something must be different between the Por-15 in the south and what we get in the NE. I'm fairly close to not touching the stuff again. I have the exact same problem Jim is having. It peals. It flakes. It gets moisture under it. I've done some relatively good prep before applying it and got the same result.

Im looking at going to a more pure marine/salt water exterior hull application paint next. I'm just simply not having good success with por15. I think Waterloo made mention he was having problems with it too. Last year. But I could be wrong on that.