A/C Gremlin

[rtjohnson1982]

Quick update: Traced wiring from APads to compressor and nothing appears damaged. Cleaned the ground connection at the firewall, checked the resistance at the harness coming from coil(3.5 ohms). I don’t know much about electrical so this may not be correct but I back probed the voltage at the harness with the truck running and a/c on and multimeter was reading 64 V which seemed odd to me.Good chance I could have been doing it wrong.
Lol. I can cycle key and reset APads and it’ll blink green, crank the truck and turn ac control on and system will go red within about 20-30 seconds from start. On a run right now but will post a video when I’m back.