Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / 355 to 308 ratio?

new reply
355 to 308 ratio?
04-16-2022, (Subject: 355 to 308 ratio? ) 
Post: #12
Rawze Offline
Forum Reject  (14143 Likes)  *******

 		Posts: 11,346
Joined: Jun 2013
Thanks: 6012
Given 14143 thank(s) in 6229 post(s)
RE: 355 to 308 ratio?
This is also the same reasons that there is a gaggle of truck owners that have 600+ HP and big torque.. and always complain they "need a better tune" because their truck feels weak.. I HATE TO INFORM THEM BUT IT IS NOT THE ENGINES FAULT.. IT IS THE HORRIBLE REAR END RATIOS THEY USE AND ENGINE/DRIVE LINE CANNOT GET THE POWER TO THE WHEELS!.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
355 to 308 ratio? - earnies2 - 04-15-2022,
RE: 355 to 308 ratio? - tree98 - 04-15-2022,
RE: 355 to 308 ratio? - Rawze - 04-16-2022,
RE: 355 to 308 ratio? - Rawze - 04-16-2022,
RE: 355 to 308 ratio? - tree98 - 04-16-2022,
RE: 355 to 308 ratio? - Rawze - 04-16-2022,
RE: 355 to 308 ratio? - JimT - 04-16-2022,
RE: 355 to 308 ratio? - Rawze - 04-16-2022
RE: 355 to 308 ratio? - JMBT - 04-26-2022,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication