N14 gremlin
05-03-2022, (Subject: N14 gremlin ) 
Post: #6
RE: N14 gremlin
Is it an celect or celect plus engine? Hook up insite, check to see if it is reading RPM while cranking, if is not then you have a timing sensor issue and the ecm does not know to fire the injectors. It’s not smoking like you say so you are not getting any fuel to the cylinders. There is also a check valve and screen on the outlet of the ecm cooling plate, pull that off and check for blockage. Also a strainer on the fuel pump that can be pulled and checked. Make sure your fuel solenoid is opening with key on.


User's Signature: 2015 389 Peterbilt. ISX 550 18speed 3.70 gears
replyreply
 Thanks given by: Rawze


Messages In This Thread
N14 gremlin - Boatymkboatface - 05-02-2022,
RE: N14 gremlin - Rawze - 05-02-2022,
RE: N14 gremlin - Signature620 - 05-02-2022,
RE: N14 gremlin - SemiSweet - 05-03-2022
RE: N14 gremlin - RocketScott - 05-03-2022,
RE: N14 gremlin - hhow55 - 05-03-2022,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.