Egt cm2450 |
05-23-2022, (Subject: Egt cm2450 ) Post: #4 | |||
| |||
RE: Egt cm2450 I'm glad to hear that..!! (1050) I havnt let it go past 850 tho. I have my warning light set at 850, and that's when I let out or down shift. I'm set at 565/2000ftlbs. Boost doesn't go above 28psi( needle width below 30psi) I dont have an oil temp gauge, I need to install one. I can read temp on insite, but no gauge. Truck had stupid display, connected to radio and since it didn't work like I wanted it to I swapped it. The oil temp gauge was digital, avail on the display. So now no gauge. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Egt cm2450 - JasonD5746 - 05-20-2022, RE: Egt cm2450 - Rawze - 05-20-2022, RE: Egt cm2450 - RollinCoal - 05-21-2022, RE: Egt cm2450 - JasonD5746 - 05-23-2022 RE: Egt cm2450 - RollinCoal - 05-23-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.