| Brake control module |
| 05-24-2022, (Subject: Brake control module ) Post: #2 | |||
| |||
| RE: Brake control module From what I can tell this is an issue between the cab controller and the abs module on the J1939 datalink. I would think you could follow an abs sensor wire to the module and then check the typical power/ground and then your canbus wires. Don't seem to be a lot of info about this error out there. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Brake control module - eggtrucks - 05-24-2022, RE: Brake control module - windowrattler - 05-24-2022 RE: Brake control module - eggtrucks - 05-25-2022, RE: Brake control module - windowrattler - 05-26-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.