| Pressure testing 871 |
| 09-09-2016, (Subject: Pressure testing 871 ) Post: #5 | |||
| |||
RE: Pressure testing 871 (09-09-2016 )dbl overdrive Wrote: Further testing is showing coolant coming from around #4 crank bearing, I can't see it coming from above the piston rod or the sleeve area so I think I'm dealing with a oil cooler. Coolant coming from the pickup tube is most likely oil cooler. You could likely remove oil filter and see if it is coming out of there too?. I think that would give you a better idea so that your not pushing coolant into the entire oil system if it is the cooler. coolant around the crank bearing could be a different issue though. who knows. It sounds like you will need to inspect/replace rod/main bearings at the very least. Just be safe and do not try to pull too many main bearings at once. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Pressure testing 871 - dbl overdrive - 09-08-2016, RE: Pressure testing 871 - in2trux - 09-09-2016, RE: Pressure testing 871 - Signature620 - 09-09-2016, RE: Pressure testing 871 - dbl overdrive - 09-09-2016, RE: Pressure testing 871 - Rawze - 09-09-2016 RE: Pressure testing 871 - gearhead - 09-09-2016, RE: Pressure testing 871 - dbl overdrive - 09-09-2016, RE: Pressure testing 871 - Signature620 - 09-09-2016, RE: Pressure testing 871 - dbl overdrive - 09-09-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.