| Invalid ECM ID CM 870 |
| 07-12-2022, (Subject: Invalid ECM ID CM 870 ) Post: #1 | |||
| |||
| Invalid ECM ID CM 870 Hey guys, Im trying to flash with Cterm a CM 870 and it fails after 5-7 seconds of being started. When I first detect ecm with the cummins ECM reflash tool, cterm is giving me the and error in the event log saying invalid module detected. No ECM ID found for device at adress0x00 . And then this is the error I get when it fails :619 impl\dlalg\GTISDownload\GTIS2_3Download.cpp, L:354 E:6 - BDS Header Record is missing in cal file. [PDL Err Code = 6 ] When I connect with instite after trying to flash, it says ECM has been rom booted. I can reflash the stock file no problem and set parameters no problem. Wait 10 min then try again and same issue. Has anyone have this issue before? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Invalid ECM ID CM 870 - Mikanic - 07-12-2022 RE: Invalid ECM ID CM 870 - Rawze - 07-12-2022, RE: Invalid ECM ID CM 870 - tree98 - 07-13-2022, RE: Invalid ECM ID CM 870 - Rawze - 07-13-2022, RE: Invalid ECM ID CM 870 - Mikanic - 07-13-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.