Cm2350

[Rawze]

(07-18-2022 )Bengy88 Wrote:  Dude follow up with him. Rawze is a beast and one of the only people out there that was willing to help me in any way

I spoke with him earlier. He seemed interested in wanting to learn.

He was trying to learn the programming the wrong way around like most people do ... by digging and reading parameter comments and trying to piece things together with a whole lot of assumptions and guessing. -Anyone who has spoken to me about the details of what goes on inside an engine computer learns real fast that this method of digging blindly like that, and comparing against others people's work, is certainly NOT any proper way to learn this stuffs.

He also had that same mis-conception that most people get caught up into. That completely false notion of "leaving everything as factory as possible", .. so that some kind of magical fairy dust would kick in and make it all run ok. - I think he found out real fast that this is one of the biggest mistakes that someone can make. These kinds of common assumptions are exactly what tears engines up and/or severely shortens their life.

I guess we will see if they want to continue down this journey of proper learning or not.