Yet another, cm2350 overheating
08-07-2022, (Subject: Yet another, cm2350 overheating ) 
Post: #6
RE: Yet another, cm2350 overheating
I checked the exhaust BP tube, it seemed restricted, but not clogged I could still blow air thru it, still cleaned it out best I could. As far as that sensor goes if it can cause the truck to run to hot, and show no other symptoms, I'll find a way to get one somehow, it's a common part, but not a cheap as it used to be, it didn't look too bad, but looking at a sensor doesn't say much.

Except pulling the CAC and AC radiators off and cleaning the outside of them plus the coolant radiator and a flush I'm out of ideas. Besides that sensor and the thermostat seal.

Mainly I'm just tired of it all, I've never run into a problem I couldn't figure out, and it's frustrating as hell.

Here is the regen history.


Attached File(s)Thumbnail(s)
   
replyreply


Messages In This Thread
RE: Yet another, cm2350 overheating - Vengeance - 08-07-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.