Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Overhead

new reply
Overhead
09-11-2016, (Subject: Overhead ) 
Post: #8
Contributing Main Memberdbl overdrive Offline
Contributing Main Member  (12 Likes)  ****

 		Posts: 122
Joined: Aug 2014
Thanks: 16
Given 12 thank(s) in 8 post(s)
RE: Overhead
This is what I thought but I wanted to be sure, I ran the overhead and never seen this befor.
I had to back 2 others off to get the detent but I have 2 that I can't get any out of.
They are not hitting the wall on the side of the head but are very close.
Can I just back then off enough so he can get it to his engine guy ?
Return to Top | find
replyreply
new reply


Messages In This Thread
Overhead - dbl overdrive - 09-11-2016,
RE: Overhead - Signature620 - 09-11-2016,
RE: Overhead - Hammerhead - 09-11-2016,
RE: Overhead - Rawze - 09-11-2016,
RE: Overhead - dbl overdrive - 09-11-2016,
RE: Overhead - Signature620 - 09-11-2016,
RE: Overhead - Rawze - 09-11-2016,
RE: Overhead - dbl overdrive - 09-11-2016
RE: Overhead - Rawze - 09-11-2016,
RE: Overhead - dbl overdrive - 09-11-2016,
RE: Overhead - Rawze - 09-11-2016,
RE: Overhead - dbl overdrive - 09-11-2016,
RE: Overhead - dbl overdrive - 09-11-2016,
RE: Overhead - Signature620 - 09-11-2016,
RE: Overhead - dbl overdrive - 09-24-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication