Overhead

[Rawze]

(09-11-2016 )dbl overdrive Wrote:  This is what I thought but I wanted to be sure, I ran the overhead and never seen this befor.
I had to back 2 others off to get the detent but I have 2 that I can't get any out of.
They are not hitting the wall on the side of the head but are very close.
Can I just back then off enough so he can get it to his engine guy ?

Have you checked the bottom of the rocker to see if the piston is sticking down too far? Sometimes this is what the actual problem is.

If you back off the rocker set point so that you have at least 0.025" movement between the rocker detent position and the top of the valve, driving it will not cause any damage, but i would NOT use the engine brake,.. or drive it very far until your problems are resolved.