CM2350 Crank no start

[Anderzhul]

- Update/conclusion -
It was indeed the multiplex parameters causing the dashes/switches not to work - was just showing ----- on the mileage. Took ecm to someone else to program and everything went good and I'm back on the road again. When I first hooked the newly programmed ecm up it threw a bunch of random faults, but some key cycles and leaving it powered on for a bit cleared most of them (not sure which one cleared them lol, left key switch on like 10 mins, and then I cycled key on/off 5 times). Couple small issues like the speedo not being correct and it's showing a code for VIN not matching in the ECU, gonna take it back to him and get that fixed soon. Now just to keep an eye out on the future random issues and to get the inline 6 kit off ebay so I can possibly solve these small issues on my own and to get this program checked out a bit. Thanks to all for the help and tips.